Water Softener Buying Tips 101-Learn How to Choose a System Based on Your House’s Needs

When choosing a water softener for your house, it is important to consider buying a softener that best fits the needs of your house. Therefore, when choosing, take into considerations the specific needs in your home and you will be guaranteed to get the best.

Below are some tips on how to choose the best water softener system based on your house’s needs:

  1. Know the hardness level of the water that you are using in your house

The level of water hardness varies from one place to another. Therefore, you will need to know the level of hardness for the water that you are using so as to choose a system that will correctly soften the water for you.

The only time that you can rely on the results from your neighbors is if you use water from the same water supply. However, if the supply is different you should carry out a water hardness test of your water to determine the grains per gallon (GPG).  The GPG is given on a scale of 0 to 10.

To measure the hardness of your water, you will require a Water hardness test kit. But if you don’t have one, you can use the soap test.

  1. The space available for the water softener system

Different water systems come in different sizes and you will have to have a rough estimate of the area where you want to fit the system so that you can choose a system that will perfectly fit in. if you don’t have a lot of space, you should consider going to a small water softening system.

If the system becomes larger than the space you intended for it, you may be forced to create some more room or even construct an area for it.

However, you can easily get any size of water softener system that you wish. There is a wide variety of water softeners available for UK citizens. Go check out the top systems from the before mentioned link and select the one that meets your needs.

  1. Amount of water used in your house

You should take into consideration the heist amount of water you use in a day and find a water softener that will comfortably supply that amount of water within the shortest time possible.

Water softener systems are normally calibrated in Gallons per minute (GPM) which shows the number of softened water gallons you can expect the system to produce per minute. If you

The usage of water in your house is normally determined by the number of people living there. Therefore, the larger the family, the more the GPM you should look for in a water softening system.

  1. The regeneration setting of the system

Water softener regeneration is another thing that you have to consider. There are two types of regeneration setting: metered and timed out.

Regeneration in metered water softener systems takes place after a set amount of water has passed through the system. On the other hand, for the timed out systems, regeneration takes place after a number of days depending on your prognosis on the amount of water you use.

If the number of people living in the house is few or you are mostly out of your home for a long time, it is best to use a timed water softener system since it will only regenerate when the set water goes through it no matter how long it takes for the set value to be reached. If you use the timed out system, your system will regenerate even if you do not use the set water since it depends on time.


Leave a Reply

Your email address will not be published. Required fields are marked *